Keyword search (4,164 papers available)

"Parvin N" Authored Publications:

Title Authors PubMed ID
1 Synthesis and Characterization of Natural Nano-hydroxyapatite Derived from Turkey Femur-Bone Waste. Esmaeilkhanian A, Sharifianjazi F, Abouchenari A, Rouhani A, Parvin N, Irani M 31144255
ENCS

 

Title:Synthesis and Characterization of Natural Nano-hydroxyapatite Derived from Turkey Femur-Bone Waste.
Authors:Esmaeilkhanian A,  Sharifianjazi F,  Abouchenari A,  Rouhani A,  Parvin N,  Irani M
Link:https://www.ncbi.nlm.nih.gov/pubmed/31144255?dopt=Abstract
Publication:
Keywords:
PMID:31144255 Category:Appl Biochem Biotechnol Date Added:2019-06-04
Dept Affiliation: ENCS
1 Mining and Metallurgical Engineering Department, Amirkabir University of Technology, Tehran, Iran.
2 Mining and Metallurgical Engineering Department, Amirkabir University of Technology, Tehran, Iran. jazi_sharifian@aut.ac.ir.
3 Department of Material Science and Engineering, Shahid Bahonar University of Kerman, Kerman, 7618868366, Iran.
4 Department of Mechanical, Industrial & Aerospace Engineering, Concordia University, Montreal, Canada.
5 Department of Chemical Engineering, Amirkabir University of Technology, Tehran, Iran.

Description:

Synthesis and Characterization of Natural Nano-hydroxyapatite Derived from Turkey Femur-Bone Waste.

Appl Biochem Biotechnol. 2019 May 30;:

Authors: Esmaeilkhanian A, Sharifianjazi F, Abouchenari A, Rouhani A, Parvin N, Irani M

Abstract

Hydroxyapatite (HAp) is a bioactive and vital material which has found many applications in the biomedical and clinical fields. This bio-ceramic powder can be synthesized via different bio-waste materials. In this study, the production of natural nanohydroxyapatite was produced through calcination of untreated turkey femur-bone waste powder at 850 °C followed by ball milling the powder. The obtained powder was characterized using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analysis. The morphology, size, and elemental composition of obtained turkey hydroxyapatite (THA) particles were investigated by scanning electron microcopy (SEM), transmission electron microcopy (TEM), and energy dispersive spectroscopy (EDS) analysis, in which the average particle size of ball milled THA was found to be about 85 nm with a Ca/P ratio of 1.63. The powder was then cold pressed and later sintered at 850, 950, 1050, and 1150 °C to evaluate its mechanical properties in terms of compressive strength and hardness. The results revealed that the strength and hardness of the samples increased by increasing the sintering temperature up to 1150 °C. Finally, the maximum values of hardness and compressive strength of the sintered THA were obtained at 1150 °C (37.44 MPa and 3.2 GPa, respectively).

PMID: 31144255 [PubMed - as supplied by publisher]




BookR developed by Sriram Narayanan
for the Concordia University School of Health
Copyright © 2011-2026
Cookie settings
Concordia University