PERFORM Publications

Keyword search (4,163 papers available)

Title		Authors	PubMed ID
1	Influence of Homogenization and Solution Treatments Time on the Microstructure and Hardness of Inconel 718 Fabricated by Laser Powder Bed Fusion Process.	Fayed EM, Shahriari D, Saadati M, Brailovski V, Jahazi M, Medraj M	32516909 ENCS
2	Multidisciplinary Design Optimization of a Novel Sandwich Beam-Based Adaptive Tuned Vibration Absorber Featuring Magnetorheological Elastomer.	Asadi Khanouki M, Sedaghati R, Hemmatian M	32422988 ENCS
3	Water Droplet Erosion of Wind Turbine Blades: Mechanics, Testing, Modeling and Future Perspectives.	Elhadi Ibrahim M, Medraj M	31906204 ENCS
4	Fabrication of Porous Gold Film Using Graphene Oxide as a Sacrificial Layer.	Alazzam A, Alamoodi N, Abutayeh M, Stiharu I, Nerguizian V	31323903 ENCS
5	Fatigue Crack Growth Behavior of the MIG Welded Joint of 06Cr19Ni10 Stainless Steel.	Tang L, Qian C, Ince A, Zheng J, Li H, Han Z	30072599 ENCS
6	Morphology of Aluminum Alloy Foams Produced with Dolomite via Partial Sintering of Precursors.	Medina Ramirez AM, Vintila RR, Drew RAL	31137682 ENCS
7	Counting the Photons: Determining the Absolute Storage Capacity of Persistent Phosphors.	Van der Heggen D, Joos JJ, Rodríguez Burbano DC, Capobianco JA, Smet PF	28773228 CHEMBIOCHEM

Title:	Morphology of Aluminum Alloy Foams Produced with Dolomite via Partial Sintering of Precursors.
Authors:	Medina Ramirez AM, Vintila RR, Drew RAL
Link:	https://www.ncbi.nlm.nih.gov/pubmed/31137682?dopt=Abstract
Publication:
Keywords:
PMID:	31137682	Category:	Materials (Basel)	Date Added:	2019-06-04
Dept Affiliation:	ENCS 1 Department of Mechanical Industrial and Aerospace Engineering, Concordia University, Montreal, QC H3G 1M8, Canada. anamaria01@live.com.au. 2 Department of Mechanical Industrial and Aerospace Engineering, Concordia University, Montreal, QC H3G 1M8, Canada. ramona.vintila@mail.mcgill.ca. 3 Department of Mechanical Industrial and Aerospace Engineering, Concordia University, Montreal, QC H3G 1M8, Canada. robin.drew@concordia.ca.

Description:

Morphology of Aluminum Alloy Foams Produced with Dolomite via Partial Sintering of Precursors.

Materials (Basel). 2019 May 24;12(10):

Authors: Medina Ramirez AM, Vintila RR, Drew RAL

Abstract

Highly expanded, low-cost aluminum-based foams were successfully produced via powder metallurgy using dolomite as foaming agent. Nickel additions (5-15 wt.%) were explored in order to reduce the temperature disparity between dolomite decomposition and the melting range of the metallic matrix. Specific Al-Ni compositions provide appropriate viscosities for effective encapsulation of CO2 gas released during dolomite decomposition. A partial sintering step of compacted precursors was introduced prior to foaming, which resulted in high porosity levels (~86%) and significant volume expansion (~250%) in the final product. The partial sintering technique was a key determining factor in obtaining stable, highly expanded cellular structures with homogeneous pores, averaging 3 mm in size and being morphologically comparable with ALPORASTM foams.

PMID: 31137682 [PubMed]

BookR: School of Health Core Facilities Booking

"Materials (Basel)" Category Publications:

Search Publications

No results