Keyword search (3,448 papers available)


Electrokinetic nondestructive in-situ technique for rehabilitation of liners damaged by fuels.

Author(s): Bani Baker M, Elektorowicz M, Hanna A

J Hazard Mater. 2018 Oct 05;359:510-515 Authors: Bani Baker M, Elektorowicz M, Hanna A

Article GUID: 30086521


Title:Electrokinetic nondestructive in-situ technique for rehabilitation of liners damaged by fuels.
Authors:Bani Baker MElektorowicz MHanna A
Link:https://www.ncbi.nlm.nih.gov/pubmed/30086521?dopt=Abstract
Category:J Hazard Mater
PMID:30086521
Dept Affiliation: ENCS
1 Department of Civil and Infrastructure Engineering, Al-Zaytoonah University of Jordan, P. O. Box 130 Amman 11733 Jordan. Electronic address: m.banibaker@zuj.edu.jo.
2 Department of Building, Civil and Environmental Engineering, Concordia University, 1455 Boul. de Maisonneuve W, Montreal, QC, H3G 1M8, Canada. Electronic address: mariae@encs.concordia.ca.
3 Department of Building, Civil and Environmental Engineering, Concordia University, 1455 Boul. de Maisonneuve W, Montreal, QC, H3G 1M8, Canada.

Description:

Electrokinetic nondestructive in-situ technique for rehabilitation of liners damaged by fuels.

J Hazard Mater. 2018 Oct 05;359:510-515

Authors: Bani Baker M, Elektorowicz M, Hanna A

Abstract

Underground Storage Tanks (UGST) are often used to store hydrocarbon products and fuels. Liners under such tanks are normally formed to prevent leaching or/and overflow to groundwater. Similar protection is required in case of waste fuels, which are discharged to disposal sites (e.g. ponds, landfill). Thus, a successful protection depends on the liner formation, which might undergo destruction due to leaching. This paper presents the results of experimental investigation to examine the serviceability of liner against leachate infiltration. In order to simulate the behavior of sand-bentonite liners affected by alternative fuels (ethanol and biofuel), the leaching column tests were applied and the hydraulic conductivity was used as an indicator of the effectiveness of the rehabilitation process. Furthermore, the silicate grout solution and pretreatment with surfactant under the effect of electrokinetic phenomena to pre-wash the biofuel residuals in liner were investigated. Silica grout formulations were developed and adequate curing periods were established for electro-silicatization process. Results showed that hydraulic conductivity was reduced fourfold for the case of using three-step electro-rehabilitation for alternative fuels under pressure of 40?kPa, and reduced threefold in the case of 100?kPa pressure on liner.

PMID: 30086521 [PubMed - in process]