Keyword search (3,448 papers available)


Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion.

Author(s): Fayed EM, Saadati M, Shahriari D, Brailovski V, Jahazi M, Medraj M

In the present study, the effect of homogenization and solution treatment times on the elevated-temperature (650 °C) mechanical properties and the fracture mechanisms of Inconel 718 (IN718) superalloy fabricated by laser powder bed fusion (LPBF) was investi...

Article GUID: 33479475
Influence of Homogenization and Solution Treatments Time on the Microstructure and Hardness of Inconel 718 Fabricated by Laser Powder Bed Fusion Process.

Author(s): Fayed EM, Shahriari D, Saadati M, Brailovski V, Jahazi M, Medraj M

Materials (Basel). 2020 Jun 05;13(11): Authors: Fayed EM, Shahriari D, Saadati M, Brailovski V, Jahazi M, Medraj M

Article GUID: 32516909
Water Droplet Erosion of Wind Turbine Blades: Mechanics, Testing, Modeling and Future Perspectives.

Author(s): Elhadi Ibrahim M, Medraj M

Materials (Basel). 2019 Dec 31;13(1): Authors: Elhadi Ibrahim M, Medraj M

Article GUID: 31906204
Title:Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion.
Authors:Fayed EM,  Saadati M,  Shahriari D,  Brailovski V,  Jahazi M,  Medraj M
Link:https://www.ncbi.nlm.nih.gov/pubmed/33479475
DOI:10.1038/s41598-021-81618-5
Category:Sci Rep
PMID:33479475
Dept Affiliation: ENCS
1 Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 Sainte-Catherine Street West, Montreal, QC, H3G 2W1, Canada.
2 Department of Mechanical Engineering, École de technologie supérieure, 1100 Notre-Dame Street West, Montreal, QC, H3C 1K3, Canada.
3 Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 1515 Sainte-Catherine Street West, Montreal, QC, H3G 2W1, Canada. mmedraj@encs.concordia.ca.

Description:

Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion.

Sci Rep. 2021 Jan 21; 11(1):2020

Authors: Fayed EM, Saadati M, Shahriari D, Brailovski V, Jahazi M, Medraj M

Abstract

In the present study, the effect of homogenization and solution treatment times on the elevated-temperature (650 °C) mechanical properties and the fracture mechanisms of Inconel 718 (IN718) superalloy fabricated by laser powder bed fusion (LPBF) was investigated. Homogenization times between 1 and 7 h at 1080 °C were used, while solution treatments at 980 °C were performed in the range from 15 to 60 min. The as-printed condition showed the lowest strength but the highest elongation to failure at 650 °C, compared to the heat-treated conditions. After heat treatments, the strength of the IN718 alloy increased by 20.3-31% in relation to the as-printed condition, depending on the treatment time, whereas the ductility decreased significantly, by 67.4-80%. Among the heat treatment conditions, the 1 h homogenized conditions at 1080 °C (HSA1 and HSA2) exhibited the highest strength and ductility due to the combined effects of the precipitation hardening and sub-structural changes. Further increases in the homogenization time to 4 and 7 h led to a decrease in the strength and significant ductility loss of the LPBF IN718 due to the considerable annihilation of the dislocation tangles and a greater precipitation of coarse MC carbide particles. Furthermore, it was found that the solution treatment duration had a crucial influence on the mechanical properties at 650 °C due to the increase in the grain boundary strength through the pinning effect of the intergranular d-phase. In addition, the fracture mechanism of the LPBF IN718 was found to be dependent on the heat treatment time. Finally, this investigation provides a map that summarizes the effect of homogenization and solution treatment times on the high-temperature mechanical behavior of LPBF IN718 by relating it to the corresponding microstructural evolution. This effort strives to assist in tailoring the mechanical properties of LPBF IN718 based on the design requirements for some specific applications.

PMID: 33479475 [PubMed]