Keyword search (3,448 papers available)


Influence of Homogenization and Solution Treatments Time on the Microstructure and Hardness of Inconel 718 Fabricated by Laser Powder Bed Fusion Process.

Author(s): Fayed EM, Shahriari D, Saadati M, Brailovski V, Jahazi M, Medraj M

Materials (Basel). 2020 Jun 05;13(11): Authors: Fayed EM, Shahriari D, Saadati M, Brailovski V, Jahazi M, Medraj M

Article GUID: 32516909
Multidisciplinary Design Optimization of a Novel Sandwich Beam-Based Adaptive Tuned Vibration Absorber Featuring Magnetorheological Elastomer.

Author(s): Asadi Khanouki M, Sedaghati R, Hemmatian M

Materials (Basel). 2020 May 14;13(10): Authors: Asadi Khanouki M, Sedaghati R, Hemmatian M

Article GUID: 32422988
Water Droplet Erosion of Wind Turbine Blades: Mechanics, Testing, Modeling and Future Perspectives.

Author(s): Elhadi Ibrahim M, Medraj M

Materials (Basel). 2019 Dec 31;13(1): Authors: Elhadi Ibrahim M, Medraj M

Article GUID: 31906204
Fabrication of Porous Gold Film Using Graphene Oxide as a Sacrificial Layer.

Author(s): Alazzam A, Alamoodi N, Abutayeh M, Stiharu I, Nerguizian V

Materials (Basel). 2019 Jul 18;12(14): Authors: Alazzam A, Alamoodi N, Abutayeh M, Stiharu I, Nerguizian V

Article GUID: 31323903
Fatigue Crack Growth Behavior of the MIG Welded Joint of 06Cr19Ni10 Stainless Steel.

Author(s): Tang L, Qian C, Ince A, Zheng J, Li H, Han Z

Materials (Basel). 2018 Aug 02;11(8): Authors: Tang L, Qian C, Ince A, Zheng J, Li H, Han Z

Article GUID: 30072599
Morphology of Aluminum Alloy Foams Produced with Dolomite via Partial Sintering of Precursors.

Author(s): Medina Ramirez AM, Vintila RR, Drew RAL

Materials (Basel). 2019 May 24;12(10): Authors: Medina Ramirez AM, Vintila RR, Drew RAL

Article GUID: 31137682
Counting the Photons: Determining the Absolute Storage Capacity of Persistent Phosphors.

Author(s): Van der Heggen D, Joos JJ, Rodríguez Burbano DC, Capobianco JA, Smet PF

Materials (Basel). 2017 Jul 28;10(8): Authors: Van der Heggen D, Joos JJ, Rodríguez Burbano DC, Capobianco JA, Smet PF

Article GUID: 28773228
Title:Influence of Homogenization and Solution Treatments Time on the Microstructure and Hardness of Inconel 718 Fabricated by Laser Powder Bed Fusion Process.
Authors:Fayed EM,  Shahriari D,  Saadati M,  Brailovski V,  Jahazi M,  Medraj M
Link:https://www.ncbi.nlm.nih.gov/pubmed/32516909?dopt=Abstract
DOI:10.3390/ma13112574
Category:Materials (Basel)
PMID:32516909
Dept Affiliation: ENCS
1 Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, 15151 Rue Sainte Catherine west, Montreal, QC H3G 2W1, Canada.
2 Department of Mechanical Engineering, École de Technologie Supérieure, 1100, Notre-Dame Street West, Montreal, QC H3C 1K3, Canada.

Description:

Influence of Homogenization and Solution Treatments Time on the Microstructure and Hardness of Inconel 718 Fabricated by Laser Powder Bed Fusion Process.

Materials (Basel). 2020 Jun 05;13(11):

Authors: Fayed EM, Shahriari D, Saadati M, Brailovski V, Jahazi M, Medraj M

Abstract

In the present study, Inconel 718 (IN718) superalloy fabricated by laser powder bed fusion (LPBF) has been characterized focusing on the effect of both homogenization and solution treatment time on grains structure, crystallographic texture, precipitates formation/dissolution and material hardness. For this purpose, a heat-treatment time window with a wide range of soaking times for both treatments was established aiming to develop the optimal post-treatment conditions for laser powder bed fused IN718. It was found that the as-printed IN718 is characterized by very fine columnar/cellular dendrites with Laves phase precipitating at the grain boundaries as well as inter-dendritic regions, which differs from the microstructure of wrought and cast materials and requires special heat-treatment conditions different from the standard treatments. The results reveal that the relatively short homogenization treatment at 1080 °C for 1 h was not enough to significantly change the as-printed grain structure and completely dissolve the segregates and Laves phase. However, a completely recrystallized IN718 material and more Laves phase dissolution were obtained after homogenization treatment for 4 h. A further increase in time of the homogenization treatment (7 h) resulted in grain growth and coarsening of carbides precipitates. The solution treatment time at 980 °C did not cause noticeable changes in the crystallographic texture and grain structure. Nevertheless, the amount of d-phase precipitation was significantly affected by the solution treatment time. After applying the heat-treatment time window, the hardness increased by 51%-72% of the as-printed condition depending on the treatment time due to the formation of ?' and ?? in the ?-matrix. The highest material hardness was obtained after 1 h homogenization, whereas the prolonged time treatments reduced the hardness. This study provides a comprehensive investigation of the post heat-treatments of the laser powder bed fused IN718 that can result in an optimized microstructure and mechanical behavior for particular applications.

PMID: 32516909 [PubMed]